5 Reasons Why Your Business Needs geobag dewatering？

— Written By Becky Spearman en Español / em Português Español

El inglés es el idioma de control de esta página. En la medida en que haya algún conflicto entre la traducción al inglés y la traducción, el inglés prevalece.

Read more

Al hacer clic en el enlace de traducción se activa un servicio de traducción gratuito para convertir la página al español. Al igual que con cualquier traducción por Internet, la conversión no es sensible al contexto y puede que no traduzca el texto en su significado original. NC State Extension no garantiza la exactitud del texto traducido. Por favor, tenga en cuenta que algunas aplicaciones y/o servicios pueden no funcionar como se espera cuando se traducen.

Português

Inglês é o idioma de controle desta página. Na medida que haja algum conflito entre o texto original em Inglês e a tradução, o Inglês prevalece.

Ao clicar no link de tradução, um serviço gratuito de tradução será ativado para converter a página para o Português. Como em qualquer tradução pela internet, a conversão não é sensivel ao contexto e pode não ocorrer a tradução para o significado orginal. O serviço de Extensão da Carolina do Norte (NC State Extension) não garante a exatidão do texto traduzido. Por favor, observe que algumas funções ou serviços podem não funcionar como esperado após a tradução.

English

English is the controlling language of this page. To the extent there is any conflict between the English text and the translation, English controls.

Clicking on the translation link activates a free translation service to convert the page to Spanish. As with any Internet translation, the conversion is not context-sensitive and may not translate the text to its original meaning. NC State Extension does not guarantee the accuracy of the translated text. Please note that some applications and/or services may not function as expected when translated.

Estoy de Acuerdo / Eu concordo / I agree Collapse ▲

Sludge bags or geotextile tubes are gaining in popularity as a way to dewater sludge. The bags are used as an alternative method to traditional pump and haul to remove sludge in a lagoon. The bags are constructed from high-strength permeable geotextiles. The porous fabric only allows water to escape. The bags are resistant to biological, chemical and UV degradation for 5-7 years. The finished product is easier to transport, can be stored and used later, and has low odor. The bags allow a farmer to target a critical area in the lagoon, such as near the intake. There is the potential for a marketable final product. You will need approval from the Division of Water Resources (DWR) animal division. Price comparison is needed to make sure that this will benefit your farm’s situation. Consider cost of equipment, polymers and distance to receiving land. This article will give a brief overview of the process. Contact your Extension Agent for more information.

Some materials and equipment needed:

• geotextile tubes (30 to 90’ in circumference and any length usually 25-100’)
• dredge to remove sludge and water from the lagoon
• pumps and piping – system needs to be able to add polymer before the pump, after the pump, and a special pump. Injection point is important. Some lagoons need more mixing, so need a pump to add polymer before mixing. Others need less, so put in polymer after the pump for less turbulence and mixing.
• solid separator
• flow meter gives total gallons per day
• frac tank mixes to have a consistent product and helps with polymer dosage rate.
• polymers and container to mix polymers. There are several polymer types to choose from (examples are aluminum sulfate, ferric sulfate, food grade polymers). The amount of polymer will influence the rate of dewatering and increase the rate and suspension of solids in the bag. Need correct ratio for proper flocculation.

This picture shows checking coagulation or flocculation to monitor polymer dosage. When the water runs clear and the solids stay in a ball means you are at the correct polymer dosage.

The picture below shows the bags. Sludge is mixed with polymer and pumped into the bags. Bags dewater and the solids stay in the bags. Bags are pumped full and allowed to dewater. This process continues until bags are completely full. Fill time is dependent on several factors – pump volume, dewater time, polymer effectiveness, etc. Rainfall can affect dewatering, not fill time.

What is a geotextile tube?

Geotextile tubes are large sludge dewatering bags or geo-containers constructed from high strength, permeable geotextiles. They work with any material that is hydraulically transported. In most applications, the use of polymers is recommended to enhance the dewatering process. Geotextile tubes are cost-effective, fast, and efficient and have minimal environmental impact.

What materials can a geotextile tube dewater?

The list of materials that can been dewatered by geotextile tubes includes:

• Municipal water treatment and wastewater sludge
• Contaminated dredged material
• Marine dredgings
• Agricultural animal waste
• Fine-grained, inorganic industrial sludge
• Construction dewatering
• Shale fracking waste water

What are the advantages of geotextile tubes?

As an alternative to sludge lagoons, wet hauling, sand drying beds, wedge wire systems, presses and other mechanical dewatering methods, geotextile tubes offer significant cost savings. And they are environmentally friendly. Often, the decanted water can be reused or discharged into local water tables, streams or storm drainage systems. Because they dewater faster than open-air pits and do not require standard heavy equipment, they create a smaller foot-print, increasing the number of potential dewatering sites and optimizing land usage when the area for containment and dewatering is limited. Sludge dewatering tubes are made from tough, UV resistant geotextiles.

• Cost-effective alternate to traditional methods
• Minimal environmental impact
• Small footprint
• Optimize land usage
• Dewater faster
• Work with a large variety of sediments, sludge and sand
• High-strength, permeable geotextile
• Tough, UV resistant

US Fabrics' EcoTubes™ Geotextile Tubes

US Fabrics' EcoTubes™ are manufactured from high strength polypropylene geotextiles and are permeable and resistant to ultra-violet light and the stresses associated with filling and placement including: abrasion, tearing, puncturing and flattening.

EcoTubes™ geotextile tubes are made to the desired diameter from standard width geotextiles. The length of the sludge dewatering tube is limited only by its weight. Filling ports are regularly spaced along the length of the tube at appropriate intervals.

If you want to learn more, please visit our website PENNPLAN.

In most cases, the EcoTube™ will be delivered to the site on a skid, rolled up on a pipe core. Alternate packaging, such as accordion folding, may be used. Although sturdy, geotextile tubes can be damaged during loading, off-loading and shipping. It is very important that any shipment be thoroughly inspected for rips and punctures before signing any shipping documents. In the case of damage, all problems should be noted on the shipping documents and the delivery refused. Once a damaged tube has been received and the shipping documents signed, it is nearly impossible to seek remedy from the shipping company.

How do I use geotextile tubes?

• Inspect geotextile tube for shipping damage
• Unroll tube flat on level ground
• Make sure tube is constrained and secured
• Place tube on an impermeable geomembrane if erosion is a concern
• Connect and secure pump hose to filling port sleeve
• Monitor geotextile tube during filling for possible ruptures
• Utilized repeated cycles of filling and dewatering
• Deposit filled tube properly in a landfill or cut open and remove solids

Every geotextile tube project is unique. As such, only general guidelines can be described, but each project requires consultation with a geotextile tube expert to identify the project’s singular attributes and to design the sludge dewatering process accordingly.

Proper site preparation is of utmost importance. Geotextile tubes can roll, especially during filling. It is important that they are constrained and placed on level ground. Once properly deployed and secured in place, the geotextile tube is hydraulically filled with dredged materials using a cutter head and suction dredge or with sludge materials using a feed pump.

EcoTubes™ have a “shirt-sleeve” style filling port. Simply place the hose into the port and secure it with a hose clamp, tie-wire or duct tape.

Once the pumping begins, clear, effluent water will drain from the geotextile tube through the small openings in the permeable geotextile fabric. Often the decanted water can be reused or returned to waterways without additional treatment. During pumping, the elevation or height of the tube needs to be monitored to prevent ruptures.

A large volume of water may be released from the tubes during the operation and can cause erosion around the tube. As such, the rate at which the water is decanted must be monitored. The sludge dewatering tube bottom will develop a filter cake quickly, so the water will decant mainly out of the sides and top of the tube. Therefore, it may be beneficial to cover the deployment area in plastic such as Visqueen and deploy sump pumps at all four corners of the dewatering area to collect the effluent. The effluent can then be returned creating a “closed-loop” system. If the tube will be exposed to external moving water, a scour apron made from an impermeable geomembrane liner with an attached anchor tube may be required.

Since the dewatering process will happen more slowly than the rate of hydraulically transported sludge entering the EcoTube™, repeated cycles of filling and dewatering will be required. After the final cycle, the solids in the geotextile tube will continue to densify further as residual water vapor escapes through the geotextile fabric. Typically over 99% of solids are captured.

Geotextile tubes fill to a complex, elliptical shape. As such, the tube will not fill to its theoretical volume. Typically 50%-60% is a realistic expectation.

When full, the entire sludge dewatering tube and its contents can be deposited in a landfill, remain on site, or the bag can be opened and the solids removed. To remove the solids, cut open the top of the EcoTube™ with a box-cutter and fold back the geotextile. Use a front end loader or excavator to scoop the material and load it into a dump truck or apply it directly to land if appropriate. The used EcoTube™ can be hauled off to a solid waste facility.

The nature of the material and federal, state and local regulations will help determine the acceptable procedure. Always get approval from the local regulatory agency before disposing of the sludge and the sludge dewatering tube.

Can I stack geotextile tubes?

For large volume projects or on sites with a limited dewatering area, geotextile tubes can be stacked in layers. Stacking tubes requires addressing the unique issues affiliated with the project and project site. Proper site preparation and safety issues must be followed in addition to other considerations.

Do I need to use polymers with geotextile tubes?

Often a polymer coagulant or flocculant is required to improve the dewatering process. Polymers help the solids bind together. The proper polymer improves the rate of dewatering, increases the rate and percentage of suspension of solids and improves the clarity of the effluent. Selecting the right polymer is critical. If some fines or color is acceptable in the filtrate, then a polymer may not be required.

Parameters that must be considered include: sludge flow, sludge concentration, flocculent flow, flocculent concentration, post-dilution water flow and injection points. It’s always best to consult with a professional polymer supplier and conduct bench tests to determine the correct products, optimum dosage and proper methods for setting up a polymer mixing and injection system. US Fabrics offers small, hanging bags to test your sludge before purchasing an EcoTube™for your project.

For more info on polymers please see: Power Point Presentation: Polymer & Sludge Bags

20 & 30 Yard Dumpster Bags

When space is extremely limited and time of the essence, US Fabrics’ Dumpster Bags are the perfect solution. Designed to fit into a standard 20 or 30 yard dumpster, these smaller sludge dewatering tubes take up little space and once full, are ready to be hauled from the jobsite to the proper landfill facility.

For more information, please visit geobag dewatering.