Guest Posts

Key Questions to Ask When Ordering 0 95 inch amoled display

Author:

Jesse

Jun. 23, 2025
  • 4
  • 0

Full Color 0.95 inch Arduino,Raspberry Pi OLED Display Module ...

Description

ER-OLEDM0.95-2C-SPI is the graphic OLED display panel attached with breakout board,made of 96x64 individual full color OLED pixels,diagonal is only 0.95 inch.The controller ic SSD, communicates via 4-wire SPI serial interface,3.3V power supply,extremely wide viewing angle and extremely operating temperature. It's pin header connection by default.

If you want to learn more, please visit our website ORIC Electronics.

It's easily controlled by MCU such as ,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held device.

Of course, we wouldn't just leave you with a datasheet and a "good luck!" We prepared the interfacing documents,libraries and examples for arduino due,mega ,uno,nano and for raspberry pi or raspberry pi zero.For microcontroller user,we also prepared the interfacing document and demo code.

problem with 0.95 inch color OLED driver ssd - Arduino Forum

Good day!

I am trying to display a picture on a 0.95 inch 65k color OLED.

The only library I use is SPI.h and the only function I know is spi.transfer()

after the display initial part and use code below:

digitalWrite(DC,HIGH);// turn to data mode,
for (int x=0;x<;x++)
{int i=0xff;
SPI.transfer(i); // full screen white

Contact us to discuss your requirements of 0 95 inch amoled display. Our experienced sales team can help you identify the options that best suit your needs.

it successfully turn the display full screen white.

however when when I change i=0x28(which should be red according to the driver datasheet), the oled displays some randomly colors

So what's the reason might cause this problem ? I totally stuck here for a long time.

and another question ,

may I possible just use SPI.transfer() to send the color picture bitmap to driver ram to display picture ?
I would like to know what's the source code to send the bitmap bit by bit to the driver ?

the bitmap is something like that(transfer by image2lcd):

/* const unsigned char gImage_16bit[] = {
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
0XFF,0XFF,0XFF,0XFF,0XFF,0XDF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,.................}

thanks in advance!

Are you interested in learning more about 0 42 inch pm oled display? Contact us today to secure an expert consultation!

Comments

0/2000

Get in Touch