Valmet coating stations for high-quality coating

Reliable coating quality with OptiCoat Layer curtain coating station at WEIG KM 3

For more information, please visit Litong.

Jun 16,

Watch the video and discover how WEIG Group invested in new coating technology and replaced an old air knife coater. In December , their board machine KM 3 started up with new OptiCoat Layer coating station in Mayen, Germany. As a result the quality of the board has enhanced by improving coating coverage and reducing streakiness of the coating.

Umka Board Mill rebuilds - 70% more capacity and enhanced quality

Apr 14,

Watch the video to learn more about how Umka Board Mill transformed its operations with three major rebuild projects by Valmet. These rebuilds increased Umka’s production capacity by nearly 70% and significantly improved board quality, enabling them to meet market demands and attract new customers.

Pilot trials on finishing technology at Valmet Paper Technology Center in Järvenpää

Feb 25,

Experience our Paper Technology Center in Järvenpää, Finland, where you can pilot and test latest finishing technologies. The pilot facility offers extensive pilot trials on finishing technology, covering all grades and different finishing technologies from sizing to reeling, winding, and runnability testing.

OptiCoat Layer curtain coating: flexible coating method for excellent printing properties

Nov 29,

OptiCoat Layer multilayer curtain coater is an easy-to-use coating application method for board and paper coating delivering excellent coating quality. There is no need for profiling; profiles are stable within a wide operation window. Due to an even coating thickness, coating layer has a uniform brightness.

WEIG KM 3: Reliable coating quality with OptiCoat Layer curtain coating station

Jun 16,

In December , WEIG Group’s latest investment in its KM 3 board machine, an OptiCoat Layer coating station, started up in Mayen, Germany. The curtain coating technology replaced an old air knife coater and has enhanced the quality of the board by improving coating coverage and reducing streakiness of the coating.

Ensuring board quality with multiple coating stations in JK Paper Limited BM 5

May 5,

JK Paper Limited invested in a new coated board making line BM 5 at their Songadh mill in India. The 4.25-meter-wide board machine, which started up in , produces folding boxboard and solid bleached board. Despite the delays and challenges caused by the global pandemic, now, three years later, the results are good: the quality of the board has been excellent, and the efficiency of the mill has improved.

Umka Board Mill increases capacity by 70 percent with three rebuilds

Apr 14,

Umka Board Mill invested in three large rebuild projects, selecting Valmet as the main supplier. The rebuilds increased their capacity by nearly 70 percent and significantly improved board quality. As a result, Umka now meets the market’s demanding expectations and is attracting new business and customers.

Liansheng Pulp and Paper: big success with PM 1 carton board and PM 3 high-grade fine paper lines

Feb 27,

Living up to expectations, Liansheng’s PM 1 carton board and PM 3 high-grade fine paper production lines have been recognized as a success not only by Liansheng, but also by their customers.

Uncompromised roll cover performance for sizing and coating

Mar 10,

Valmet is the market leader in film coaters and sizers, and has developed a great deal of related process know-how. We have put this expertise to good use in developing new roll cover materials that deliver uncompromised sizing and coating performance with both grooved and smooth rods, as well as with coating blades.

Want more information on Double coating line? Feel free to contact us.

Joining forces for innovation with SAICA El Burgo's new off-line coating machine

Dec 11,

SAICA was aiming for improved quality, reduced costs, and responsible fiber use, but it found itself with innovative coated white top liner grades with better properties than they bargained for. This was a result of three partners – SAICA, Valmet and pigment supplier Omya – joining forces.

Coater bottom waste reduced at Burgo Villorba

Aug 20,

The off-machine coater at Burgo Villorba’s paper machine PM 8 in Italy is making good use of Valmet’s WaterJet turn-up system and Valmet’s knowhow. With over 99% roll change performance efficiency, they have reduced the amount of bottom waste significantly and increased the average speed of the coating machine by 100 m/min, and they are now operating more safely.

Many product designers, OEMs, and manufacturers like you choose metal for their products. Its versatility, durability, sustainability, and cost-effectiveness make it an attractive material to make various products—from housewares and outdoor furniture to machinery and automotive parts. Yet, one of its downfalls is it’s susceptible to corrosion, oxidation, and wear.

That’s why so many companies turn to powder coating for their metal products and machinery. Powder coating has been around for over 75 years and continues to be a superior coating that makes metal parts more robust, more durable, corrosion-resistant, and wear-resistant. The five stages of powder coating are cheaper to apply, last longer than paint, and are available in a wide variety of colors to customize your part.

To get that protective coating your steel and aluminum parts need, choose Precision Coating Technology & Manufacturing! We’ve been a leader in the powder coating industry for over 30 years and have the equipment, knowledge, and superior service to ensure we’ve done your part coating correctly. We enjoy taking on complex and unique jobs that others won’t touch and providing excellent work for our customers. Get started by learning about our coating process and request a quote today!

Stage 1. Pre-treatment: Part Cleaning

The five stages of powder coating begin with pre-treatments, which start with thoroughly cleaning the metal parts. The pieces must be free of oil, grease, dirt, dust, scale, rust, soil, debris, and oxides for the powder coat application to succeed. If these contaminants remain, they can appear imperfect on the final product.

We first remove impurities like gum, stickers, or rust to ensure traces of these contaminants do not show up in the final application. We then use a pre-treatment powder coating washer to get rid of any remaining particles that could ruin the finishing of your metal part. After washing it, we do a thorough rinse with pure water to remove any lasting bits of chemicals and then quickly dry it to prevent rust from forming.

Stage 2. Pre-treatment: Iron Phosphate Coating & Rinse

The second of our five stages of powder coating is an iron phosphate conversion coating. This step is necessary to improve the powder coat’s bonding, improve corrosion resistance, and minimize oxidation if the final product is scratched. Iron phosphate is a lower-cost coating and is compatible with steel and aluminum.

This step is necessary and serves as the basis of many of the advantages of powder-coating, like rust resistance. Once again, after this coating adheres to the metal substrate, it is given a good rinse in pure water free from additives.

Stage 3. Pre-treatment: Sealant & Drying

During the third stage of powder coating, the item finishes its pre-treatment process with a sealant. The sealant must be at the proper pH level, or the powder coating won’t stick to the product. In the five stages of powder coating, this step is necessary to remove any final contaminants and prepare the surface for the powder coat.

After the sealant is applied, the product is thoroughly dried to remove any moisture and ensure proper adhesion of the protective coating. We ensure this step is done right to get a high-quality finish on your metal products in our coating operations.

There are various sealers we use in this step, and which one we choose is based on the metal, product, and future performance. You can trust the experts at PCTM to help you select the suitable sealer for your product. Simply contact us today to discuss your project!

Stage 4. Powder Coating Process

Now that the metal surface is cleaned and primed, it is ready for the fourth of five stages of the powder coating process. Here is where our company really shines. We expertly handle the powder coating of your product—whether it’s a single piece or thousands of parts. It moves through our powder coating line, where our professional crew manually powder coats your part.

We offer four long-lasting coatings from which to choose: fluid bed coating, electrostatic spray powder coating, PTFE coating, and plastisol powder coating.

Fluid Bed Coating

We add a thicker, more substantial protective layer to the piece with fluid bed coating. The part is heated and then dipped into a powder bath, where melted particles form a fused film on the metal part. This type of coating is best for complex applications to cover blemishes, add thickness, and create superior weather and wear resistance.

Electrostatic Spray Powder Coating

By applying powder coating using an electrostatic spray gun, colored powders are positively charged. They then adhere to the metal product, which is grounded, so it is negatively charged. This process provides a durable and beautiful, chip-resistant finish. We can do electrostatic powder spray coating in our spray booth on our conveyor line or with batch-coating.

PTFE Coating

Polytetrafluoroethylene or PTFE coatings are applied either as a liquid spray or a powder coating. This versatile protective coating is used in many industries, like medical, food processing, machined surfaces, and wire insulation. It’s also frequently used in cookware, making the surface non-stick. It can even apply well to certain plastics, but it needs an additional special pre-treatment called abrasion first.

Plastisol Powder Coating

Plastisol powder coating has numerous benefits, and that’s why it’s used in various applications, from hand tools and dishwasher racks to hardware for military vehicles. Plastisol is essentially liquid vinyl and is applied using dip-coating here at PCTM. This method eliminates the need to deburr the base material and provides an even, thick coating.

Stage 5. Curing

Finally, after the product has been powder coated using the best method for your material, it enters the final step: the curing stage. This heat, which can be more than 450 degrees Fahrenheit, melts the powder onto the metal to provide complete protection. As the powder coating cures and fully adheres to the metal, the particles bond together to create a smooth, even finish.

Are the 5 Stages of Powder Coating Right for You?

These five stages of powder coating provide excellent protection for your metal products when done correctly. Parts will last longer in high-wear environments, handle exposure to moisture without rusting, and have added strength and durability. If these benefits of powder coating sound like just the solution you need, get in touch with our highly professional representatives to tell them about your project.

We’ll work with you to find the best powder coating solution for your specific product and its future use. With excellent rust and wear protection, quick turnaround times, and a beautiful powder coating finish, we’re lightyears ahead of our competition!

Get started today by telling us about your project and requesting a quote!

For more information, please visit Aluminium Coil Coating.